Error Code
high
Hobart LXe – LXe Will Not Drain
On your LXe SERIES DISHWASHERS unit, a "machine will not drain" issue…
Hobart LXe - No Operation (No Display)
Critical / Stop Operation
Warning: The information provided here is for educational purposes only.
Working with commercial kitchen equipment involves high voltage, gas, and high temperatures.
We strongly recommend contacting a certified service technician for any repairs.
We are not responsible for any damage or injuries resulting from DIY repair attempts.
This information is provided 'as is' without any guarantees of completeness or accuracy.
TLDR
On your HOBART LXe SERIES DISHWASHERS unit, "No Machine Operation (No Display)" indicates a complete loss of power or an inactive state. This can be due to the machine being off, a tripped circuit breaker, a blown fuse, or the power cord being disconnected. Thoroughly check all power supply connections and the circuit protection.
Technical Details
Repair Steps:
- Verify Machine Power Status: Ensure the main power switch for the HOBART LXe dishwasher is in the “ON” position. Sometimes, the simplest solution is overlooking the power state.
- Inspect Circuit Breaker/Fuses: Locate the electrical panel supplying power to the dishwasher. Check if the dedicated circuit breaker for the LXe unit has tripped. If it’s tripped, reset it. For models that use fuses, inspect them for a break; replace any blown fuses with the correct amperage rating. If the breaker immediately trips again, a short circuit likely exists, requiring further professional diagnosis.
- Examine Power Cord Connection: For corded HOBART LXe models, ensure the power cord is securely plugged into a functional electrical outlet. A loose connection or an unplugged cord is a common cause of no operation. Test the outlet with another device to confirm it has power.
- Professional Power Supply Diagnosis: If the above steps do not restore power, the issue may lie deeper within the machine’s electrical system. This could include a faulty main power switch, a defective power supply board, or a failure on the main control board. Due to high voltage and complex electrical components, this requires a qualified RestoFixer technician to safely diagnose and repair. Do not attempt internal electrical repairs without proper training and tools.
Common Questions:
Q: Why won’t my HOBART LXe dishwasher turn on?
A: Your HOBART LXe dishwasher may not turn on due to the main power switch being off, a tripped circuit breaker, a blown fuse, or the power cord being unplugged. Always start by checking these basic power supply components.
Q: What should I do if the circuit breaker keeps tripping after I reset it for the dishwasher?
A: If the circuit breaker repeatedly trips, it indicates a significant electrical issue, such as a short circuit within the dishwasher. Disconnect the unit from power immediately and contact a qualified commercial kitchen technician to diagnose and repair the fault safely.
Q: Can a non-functional display alone prevent my HOBART LXe from operating?
A: A non-functional display is typically a symptom of a larger power interruption affecting the entire machine. If there’s “No machine operation” along with “no display,” the root cause is usually a complete lack of power to the control system, not just the display unit itself.
When to call a technician
For this error, we recommend calling a certified technician. Do not continue operation or attempt repair yourself.
- Equipment shows a critical or stop-operation fault.
- You smell gas, burning, or see smoke or sparks.
- Error returns after following the steps above.
- You are not trained to work on this equipment.
- Warranty or safety could be affected by DIY repair.