Error Code
medium
Hobart LXn/LXGn – LXn/LXGn Will Not Drain
On your HOBART LXn/LXGn SERIES DISHWASHERS unit, a "Machine Will Not Drain"…
Hobart LXn/LXGn - Error 039: Fill Cycle Interrupted - Door Opened During Fill
Warning / Can Continue
Warning: The information provided here is for educational purposes only.
Working with commercial kitchen equipment involves high voltage, gas, and high temperatures.
We strongly recommend contacting a certified service technician for any repairs.
We are not responsible for any damage or injuries resulting from DIY repair attempts.
This information is provided 'as is' without any guarantees of completeness or accuracy.
TLDR
On your LXn/LXGn SERIES DISHWASHERS unit, error code 039 indicates that the wash door was opened during a water fill cycle. To clear the error, simply close the door completely and ensure it is fully seated. The dishwasher will automatically resume its fill operation once the door is properly latched.
Technical Details
Repair Steps:
- Verify Door Closure: Ensure the dishwasher door is fully closed and securely latched. A slight gap or improper seating can prevent the cycle from continuing and trigger this error.
- Check for Obstructions: Inspect the door frame, gasket, and latch area for any food debris, utensils, or other obstructions that might prevent the door from sealing completely. Clean any debris found.
- Inspect Door Latch Mechanism: Examine the door latch mechanism for any visible signs of wear, damage, or misalignment. A compromised latch might not properly engage or signal the control board that the door is closed.
- Test Door Interlock Switch (If Suspected): If the error persists despite confirming the door is closed and clear of obstructions, a technician may need to check the functionality of the door interlock switch with a multimeter to ensure it’s sending the correct “closed” signal to the control board.
- Monitor for Recurrence: After resolving the immediate issue, observe if the fill cycle resumes normally and if the error reappears. Frequent recurrence without user intervention might indicate an intermittent issue with the door switch or control logic, warranting professional service.
Common Questions:
Q: Why does my Hobart LXn/LXGn display error 039?
A: This error indicates that the dishwasher’s door was detected as open while the unit was in its water fill cycle. The machine pauses operation as a safety and operational measure to prevent water spillage.
Q: What should I do immediately when error 039 appears?
A: The first and most common solution is to simply ensure the dishwasher door is securely closed and fully latched. The unit should then automatically resume its fill cycle once the door is properly secured.
Q: Could a faulty door component cause persistent error 039?
A: Yes, if the error persists even after confirming the door is closed, it could suggest an issue with the door latch mechanism or the door interlock switch not signaling closure correctly. In such cases, professional service is recommended to diagnose and repair the component.
When to call a technician
Consider calling a certified technician if:
- The error keeps coming back after you've tried the steps above.
- You're not comfortable doing the checks or repairs yourself.
- You notice unusual noise, smell, or behaviour.
- Equipment is under warranty and you want official service.
- You need the unit back in service quickly with minimal downtime.