Error Code
medium
Hobart LXn/LXGn – LXn/LXGn Will Not Drain
On your HOBART LXn/LXGn SERIES DISHWASHERS unit, a "Machine Will Not Drain"…
Hobart LXn/LXGn - Error 076: Sanitizer Empty - Refill and Prime Pump
Caution / Monitor Closely
Warning: The information provided here is for educational purposes only.
Working with commercial kitchen equipment involves high voltage, gas, and high temperatures.
We strongly recommend contacting a certified service technician for any repairs.
We are not responsible for any damage or injuries resulting from DIY repair attempts.
This information is provided 'as is' without any guarantees of completeness or accuracy.
TLDR
On your HOBART LXn/LXGn SERIES DISHWASHERS unit, error code 076 indicates that the sanitizer is not being sensed after multiple wash cycles. This typically means the sanitizer bottle is empty, improperly connected, or the pump requires priming. Verify the sanitizer supply and connection, then press the ENTER button to prime the pump and clear the error.
Technical Details
Repair Steps:
- Inspect Sanitizer Bottle: Verify that the sanitizer bottle is not empty. If it is, replace it immediately with a fresh bottle of the correct chemical type for your Hobart LXn/LXGn dishwasher.
- Check Cap and Tube Connection: Ensure the sanitizer bottle’s cap and suction tube assembly are properly and securely fastened to the bottle. A loose connection can introduce air and prevent the pump from drawing sanitizer.
- Verify Tube Integrity: Examine the sanitizer suction tube for any kinks, damage, or blockages that could impede flow. Ensure it reaches the bottom of the sanitizer bottle.
- Prime the Sanitizer Pump: After ensuring the bottle is full and connections are secure, press the ENTER button on the dishwasher’s control panel. This action primes the sanitizer pump, drawing chemical into the system. Repeat this step as needed until the error clears and sanitizer is consistently sensed.
- Check for Clogs: If the error persists, there might be a clog in the sanitizer dispensing line or the nozzle. Carefully inspect and clear any obstructions.
- Confirm Sanitizer Type: Ensure you are using the correct type and concentration of sanitizer specified by Hobart for the LXn/LXGn series. Incorrect chemicals can affect sensor readings or pump performance.
- Monitor for Recurrence: After resolving the issue, run several wash cycles to ensure the error does not reappear. If the problem continues, there may be an underlying issue with the sanitizer pump, sensor, or control board.
- Contact a RestoFixer Specialist: If all troubleshooting steps fail to resolve error 076, it is recommended to contact a qualified commercial kitchen equipment technician for further diagnosis and repair of the sanitizer pump, sensor, or control system.
Common Questions:
Q: What does HOBART LXn/LXGn error code 076 mean?
A: Error code 076 on your HOBART LXn/LXGn SERIES DISHWASHERS indicates that the machine’s control system has not detected the presence of sanitizer for a set number of consecutive wash cycles.
Q: How do I prime the sanitizer pump on my Hobart LXn/LXGn dishwasher?
A: After ensuring the sanitizer bottle is full and properly connected, simply press the ENTER button on the dishwasher’s control panel. This initiates a priming sequence to draw sanitizer into the system and should clear the error.
Q: What if the 076 error code persists after refilling and priming?
A: If the error continues, check the sanitizer lines for clogs or kinks, ensure the suction tube is correctly positioned in the bottle, and verify the sanitizer product is correct. If the issue persists, the sanitizer pump or sensor may be faulty, requiring professional service from a RestoFixer technician.
When to call a technician
Consider calling a certified technician if:
- The error keeps coming back after you've tried the steps above.
- You're not comfortable doing the checks or repairs yourself.
- You notice unusual noise, smell, or behaviour.
- Equipment is under warranty and you want official service.
- You need the unit back in service quickly with minimal downtime.