Error Code
medium
Hobart LXn/LXGn – LXn/LXGn Will Not Drain
On your HOBART LXn/LXGn SERIES DISHWASHERS unit, a "Machine Will Not Drain"…
Hobart LXn/LXGn - Error 080: Delime Lockout Due to Ignored Reminder
Critical / Stop Operation
Warning: The information provided here is for educational purposes only.
Working with commercial kitchen equipment involves high voltage, gas, and high temperatures.
We strongly recommend contacting a certified service technician for any repairs.
We are not responsible for any damage or injuries resulting from DIY repair attempts.
This information is provided 'as is' without any guarantees of completeness or accuracy.
TLDR
On your HOBART LXn/LXGn SERIES DISHWASHERS unit, error code 080 indicates a delime lockout. This occurs because the delime required reminder has been ignored 10 consecutive times, preventing further operation. To resolve, you must initiate and complete a full delime cycle immediately to unlock the machine and reset the reminder.
Technical Details
Repair Steps:
- Understand the Lockout Condition: Error 080 signifies that your HOBART LXn/LXGn SERIES DISHWASHERS has entered a delime lockout state because the “Delime Required” reminder was ignored 10 consecutive times. The machine will not operate until a delime cycle is completed.
- Initiate a Delime Cycle: Locate the control panel on your LXn/LXGn unit. The display should show the error message. Press the ENTER button (or the corresponding button to acknowledge the error/enter the delime menu).
- Follow On-Screen Prompts: The machine will guide you through the delime process. This typically involves adding a specified commercial delimer chemical (ensure it’s suitable for Hobart dishwashers) to the wash tank or dispenser and then starting the cycle. Refer to your operator’s manual for specific instructions on delimer quantity and placement.
- Complete the Delime Cycle: Allow the delime cycle to run to completion without interruption. This cycle is designed to remove mineral scale buildup from the interior of the wash chamber, heating elements, and other components.
- Verify Delime Reset: Once the delime cycle is finished, the error code 080 should clear, and the delime reminder counter will be reset. The machine should then return to normal operational status.
- Prevent Future Lockouts: Establish a regular deliming schedule based on your water hardness and usage frequency. Consistent preventive maintenance, including timely deliming, is crucial for optimal machine performance and longevity.
Common Questions:
Q: Why is deliming important for my Hobart dishwasher?
A: Deliming removes mineral scale (lime and calcium) buildup, which can reduce heating efficiency, block spray arms, impair washing performance, and lead to premature component failure. Regular deliming ensures your machine operates efficiently and effectively.
Q: How often should I delime my LXn/LXGn SERIES DISHWASHERS unit?
A: The frequency depends on your local water hardness and machine usage. Hobart dishwashers provide reminders, and ignoring these ten times triggers the 080 lockout. Consult your operator’s manual for specific recommendations based on your operational environment.
Q: Can I use any descaling chemical for deliming?
A: No. Always use a commercial delimer specifically approved for use in Hobart dishwashers and suitable for commercial kitchen equipment. Using incompatible chemicals can damage components, void warranties, or pose safety risks. Refer to your machine’s manual for recommended deliming agents.
When to call a technician
For this error, we recommend calling a certified technician. Do not continue operation or attempt repair yourself.
- Equipment shows a critical or stop-operation fault.
- You smell gas, burning, or see smoke or sparks.
- Error returns after following the steps above.
- You are not trained to work on this equipment.
- Warranty or safety could be affected by DIY repair.