Rational iCombi Classic - Error 40: Check the Care Pump (M18) in the Function Test

⚠️ Caution / Monitor Closely
Warning: The information provided here is for educational purposes only. Working with commercial kitchen equipment involves high voltage, gas, and high temperatures. We strongly recommend contacting a certified service technician for any repairs. We are not responsible for any damage or injuries resulting from DIY repair attempts. This information is provided 'as is' without any guarantees of completeness or accuracy.

TLDR

On your iCombi Classic unit, error code 40 indicates an issue with the care pump (M18). This pump is essential for the automatic cleaning and care cycles, ensuring proper dispensing of care products. You need to perform a function test on the pump and check its electrical connections and operation to resolve this.

Can't fix it yourself?

Our certified technicians can help you on-site.

Technical Details

Repair Steps:

  1. Access Service Mode and Function Test: Begin by accessing the service mode on your iCombi Classic. Navigate to the function tests menu and specifically select the test for the care pump (M18). The system notes that relay Y4 is activated simultaneously during this test.
  2. Observe Pump Operation and Electrical Connections: Initiate the function test for the care pump. Carefully listen and observe if the pump is attempting to operate. Simultaneously, check the electrical connections to the care pump (M18) and verify that the associated relay (Y4) is activating. Look for any loose or corroded wiring.
  3. Inspect Care Product Lines and Filter: Check the care product suction lines for any signs of blockages, kinks, or air leaks that could prevent the pump from drawing fluid. Ensure the care product container is not empty and that any inline filters are clean and unobstructed.
  4. Measure Voltage and Consider Replacement: If the pump shows no signs of life during the function test, use a multimeter to measure the voltage at the pump’s terminals. If proper voltage is present but the pump doesn’t run, the pump motor (M18) itself is likely faulty and requires replacement. Ensure power is disconnected before replacing.
  5. Run Rinsing Programme and Reset Error: After any inspection or repair, reassemble the unit. Run a rinsing program to verify the care pump’s functionality and prime the lines. Clear the error code from the system. Monitor the unit’s subsequent cleaning cycles to confirm the issue is resolved.

Common Questions:

Q: What does error code 40 signify on my RATIONAL iCombi Classic?

A: Error code 40 indicates a problem with the care pump (M18), which is responsible for dispensing care products during automatic cleaning and rinsing cycles.

Q: Can I continue to cook with error code 40 active?

A: While the oven may still function for cooking, the automatic care and cleaning programs will likely be compromised or unavailable. It is recommended to address the error to maintain hygiene and functionality.

Q: What are the typical causes of a care pump error?

A: Common causes include a faulty pump motor, blockages in the care product lines, a clogged filter, or electrical connection issues with the pump (M18) or its activating relay (Y4).

When to call a technician

Consider calling a certified technician if:

  • The error keeps coming back after you've tried the steps above.
  • You're not comfortable doing the checks or repairs yourself.
  • You notice unusual noise, smell, or behaviour.
  • Equipment is under warranty and you want official service.
  • You need the unit back in service quickly with minimal downtime.

Need Professional Help?

Our certified technicians can help you on-site.

Other iCombi Classic Error Codes

🔧 Fix this Error - Call Pro