Unox BAKERLUX SHOP.Pro - The Brightness of the Control Panel Is Very Low

⚠️ Caution / Monitor Closely
Warning: The information provided here is for educational purposes only. Working with commercial kitchen equipment involves high voltage, gas, and high temperatures. We strongly recommend contacting a certified service technician for any repairs. We are not responsible for any damage or injuries resulting from DIY repair attempts. This information is provided 'as is' without any guarantees of completeness or accuracy.

TLDR

On your BAKERLUX SHOP.Pro unit, a control panel with very low brightness indicates a damaged LCD screen. This issue significantly impairs user interaction and operation visibility. The definitive solution is to replace the entire control panel assembly to restore full functionality.

Can't fix it yourself?

Our certified technicians can help you on-site.

Technical Details

Repair Steps:

  1. Safety First: Disconnect Power. Always disconnect the UNOX BAKERLUX SHOP.Pro oven from its main electrical supply before performing any service or inspection. Failure to do so can result in serious injury or death.
  2. Confirm Symptom and External Factors. Verify that the control panel’s brightness is severely diminished and not merely a temporary setting or an issue with ambient lighting. If accessible, attempt to adjust brightness settings via the menu to rule out software configuration.
  3. Perform Visual Inspection. Carefully inspect the control panel for any obvious signs of physical damage, such as cracks, impact marks, liquid ingress, or discoloration that might indicate internal damage to the LCD screen or its backlighting components.
  4. Access the Control Panel Assembly. Depending on your specific UNOX BAKERLUX SHOP.Pro model, you may need to remove the oven’s outer casing or the front display bezel to gain access to the rear of the control panel. Always consult the manufacturer’s service manual for precise disassembly instructions for your model.
  5. Check Internal Connections. With the power disconnected, meticulously inspect all ribbon cables and electrical connectors leading to the control panel and its associated display board. Ensure all connections are securely seated, free from corrosion, and undamaged. Gently re-seat any loose connectors.
  6. Evaluate Internal Power Supply (Advanced). For experienced technicians, use a multimeter to check the voltage outputs on the main control board that supply power to the display backlighting. This requires knowledge of the circuit diagrams and proper safety precautions. If the correct voltage is absent or incorrect, the fault may originate from the main control PCB rather than just the display.
  7. Order the Correct Replacement Part. If inspections confirm a damaged LCD or the control panel remains unresponsive/dim despite sound connections and correct power input, obtain a genuine UNOX replacement control panel assembly. Ensure the part number is specific to your BAKERLUX SHOP.Pro model series.
  8. Replace the Control Panel. Carefully disconnect all wiring harnesses and remove the mounting hardware securing the existing control panel. Install the new control panel assembly, ensuring all connections are correctly re-established and the panel is securely mounted according to manufacturer specifications.
  9. Test Functionality. Once the new control panel is installed and all covers are re-secured, reconnect the oven to the main power supply. Power on the unit and thoroughly test the new control panel for proper brightness, accurate touch responsiveness (if applicable), and overall functionality. Verify that all display elements and operational buttons work correctly before returning the oven to service.

Common Questions:

Q: Why is my UNOX BAKERLUX SHOP.Pro control panel suddenly dim?

A: A sudden dimming of your UNOX BAKERLUX SHOP.Pro control panel is typically caused by a failure of the internal LCD screen or its associated backlighting components within the control panel assembly itself. This often indicates physical damage or component degradation.

Q: Can I repair just the LCD screen on my UNOX BAKERLUX SHOP.Pro?

A: For most UNOX BAKERLUX SHOP.Pro models, the LCD screen is an integrated component of the entire control panel assembly. It is generally not designed for individual replacement, making it necessary to replace the complete control panel unit.

Q: Is it safe to operate my UNOX oven with a dim control panel?

A: While the oven may still function, operating a UNOX BAKERLUX SHOP.Pro with a severely dim or unreadable control panel is not recommended. It can compromise safety, hinder accurate monitoring, and prevent proper adjustment of cooking parameters, potentially leading to incorrect cooking results or unsafe operation.

When to call a technician

Consider calling a certified technician if:

  • The error keeps coming back after you've tried the steps above.
  • You're not comfortable doing the checks or repairs yourself.
  • You notice unusual noise, smell, or behaviour.
  • Equipment is under warranty and you want official service.
  • You need the unit back in service quickly with minimal downtime.

Need Professional Help?

Our certified technicians can help you on-site.

Other BAKERLUX SHOP.Pro Error Codes

🔧 Fix this Error - Call Pro